Seite 1 von 1

OAW ADAPTION NOT COMPLETE

Verfasst: Di 29. Sep 2020, 14:05
von audiEX
hello everyone, sorry for the English, i dont know german.
I have Audi A4 B8 1,8tfsi fwd that recently i changed gearbox due to some issues with the megatronic.
The new gearbox (70.000km) working fine, but the car doesn't start good, it start abruptly when you are in slightly uphill.
I tried serveral times to do basic settings in the gearbox as you guys saying in the forum and backward complete and for forward can't complete. I have tried with different temperatures and different profiles driving ,
I do not understand why I fell under 10nm is forward
Any help welcome,thanks
[External Link Removed for Guests]

Re: OAW ADAPTION NOT COMPLETE

Verfasst: Do 1. Okt 2020, 12:41
von lubusch
Go into the transmission control unit and then go to the basic position, since all learning values ​​are deleted.
Ferry so 20-30km
Switch through everything D, S, also in the switching gate 12345678.

Re: OAW ADAPTION NOT COMPLETE

Verfasst: Do 8. Okt 2020, 07:44
von audiEX
Thanks for the advice.
I realized IDE00498 ,driving 26km all gear
then the oil temperature has risen above 90 ,so I made the basic adjustment the next day.
Βackward complete in 2 attempts,forward can't complete in 15-20 attempts
[External Link Removed for Guests]

do i have to do IDE00795 ?

Thanks

Re: OAW ADAPTION NOT COMPLETE

Verfasst: Do 15. Okt 2020, 07:47
von audiEX
Good Morning, is there any idea anyone ?

Re: OAW ADAPTION NOT COMPLETE

Verfasst: Do 15. Okt 2020, 08:55
von Horch
Good morning,

follow this [External Link Removed for Guests] and try the method described in the TPI.

Regards,

Horch

Re: OAW ADAPTION NOT COMPLETE

Verfasst: Mo 1. Aug 2022, 11:13
von Nemeth1994
audiEX hat geschrieben: Di 29. Sep 2020, 14:05 hello everyone, sorry for the English, i dont know german.
I have Audi A4 B8 1,8tfsi fwd that recently i changed gearbox due to some issues with the megatronic.
The new gearbox (70.000km) working fine, but the car doesn't start good, it start abruptly when you are in slightly uphill.
I tried serveral times to do basic settings in the gearbox as you guys saying in the forum and backward complete and for forward can't complete. I have tried with different temperatures and different profiles driving ,
I do not understand why I fell under 10nm is forward
Any help welcome,thanks
[External Link Removed for Guests]
Hi friend!

what was the solution to your problem?